Sampling Mode [SAMPLING]
Reference
DTX900 Owner’s Manual
141
Dr
um Kit mode
Ref
erence
Song mode
Clic
k mode
Tr
igger mode
File mode
Utility mode
Chain mode
Sampling mode
Explanations here apply to step 5 on page 140.
From the display called up via the [SF5] SET END button
on the [F3] TRIM display, you can set the tempo, beat
(time signature) and measure for the audio data included in
the User Voice, resulting that the End Point is automatically
determined. If you are satisfied with the result (press [SF1]
to audition the result), press the [F6] OK button to return to
the original display. If not, manually edit the End Point
until you are satisfied.
1
Tempo
Determines the tempo of User Voice playback. Setting the
value here changes the End Point so that the length between
the Start Point and the End Point matches the settings of the
Beat (time signature) and Measure.
B
Beat (Time signature)
Determines the time signature of User Voice playback. Setting
the value here changes the End Point so that the length
between the Start Point and the End Point matches the set-
tings of the Tempo and Measure.
C
Meas (Measure and beat)
Determines the length (measure and beat) of User Voice play-
back. Setting the value here changes the End Point so that the
length between the Start Point and the End Point matches the
settings of the Tempo and Beat (time signature).
Setting the End Point by Specifying
Tempo, Beat and Measure
[SF5] SET END
>
>
>
>
Range
30 – 300
Settings
1/4 – 16/4, 1/8 – 16/8, 1/16 – 16/16
Range
Measure: 000 – 032
Beat: 00 – 15 (Varies depending on the Beat
setting.)
NOTE
• The Measure setting here indicates the length between the Start
Point and End Point of the audio data included in the User Voice.
When you wish to play two measures beginning from the Start Point
of the User Voice, set the Measure parameter to “002:00.”
1
2
3
