For DTX900M Owners
Differences from DTX900
Building on the performance and functionality of the DTX900—the flagship model in our lineup
of drum trigger modules—the enhanced DTX900M model delivers added convenience. In specific
terms, the DTX900M features improvements in the following three areas.
●
Sampling memory included as standard
●
Addition of a new Auto Power-Off function
●
Addition of new pad types
These DTX900M enhancements are described in detail below.
●
Sampling memory included as standard
The DTX900M comes with 512 MB of sampling memory (SDRAM) built in. Accordingly, external audio can be sampled
without the need for a separately-sold memory chip (DIMM).
●
Addition of a new Auto Power-Off function
The DTX900M features an Auto Power-Off function that will help to save energy should you forget to turn it off yourself.
This function automatically turns off the drum trigger module after a set period of inactivity.
■
Setting the Auto Power-Off function
Using the following procedure, you can set the amount of time that the Auto Power-Off function waits before turning
off the drum trigger module.
IMPORTANT
• Because of the addition of SDRAM, separately-sold memory chips (DIMM) can no longer be installed.
Accordingly, the Optional DIMM Installation section of this Owner’s Manual (on pages 147 to 149) does not
apply to the DTX900M.
• Whenever you encounter the phrase “DIMM (sold separately)” in this Owner’s Manual, you should interpret it
as meaning “SDRAM (built-in)”.
• SDRAM supports both writing and deleting of data; however, the content of this memory is cleared whenever the power is turned off.
Procedure
Settings (minutes)
Default setting (minutes)
[UTILITY]
→
[F1] GENERAL
→
[SF5]
→
OTHER
→
Change the AutoPowerOff setting
→
[STORE]
off (Auto Power-Off disabled), 5, 10, 15, 30,
60, 120
30
NOTICE
