Creating a Drum Kit
Quick Guide
Quic
k Guide
DTX900 Owner’s Manual
41
C
Voice Set number
You can select the Voice Set number here from the Voice Set category selected above.
In the INPUT display, an asterisk (*) will appear when the Voice set at each Trigger
Input source is different from that in the current Voice Set.
D
[SF5] SOURCE or INPUT
Pressing this button toggles the indication at the top left corner between INPUT
(Trigger Input jack) and SOURCE (Trigger Input Source).
E
[SF6] Input Lock
Pressing this button turns the Input Lock (“L” indicator at the right corner of the dis-
play) on or off. Normally, the Trigger Input jack or Trigger Input Source to be edited
can be determined by hitting the corresponding pad. If you want to maintain it even if
you hit any pad, press this button to turn the Input Lock (“L” indicator) on.
4
When “INPUT” is shown at the tab corresponding to the [SF5]
button, press the [SF5] button so that “INPUT” is shown at the
right corner of the display.
5
Select the Trigger Input jack by hitting the corresponding pad or
by moving the cursor to the INPUT then using the data dial, [INC/
YES] and [DEC/NO] buttons.
The corresponding illustration appears.
6
Move the cursor to the Voice Set category, then select the desired
category by using the data dial, [INC/YES] and [DEC/NO] buttons.
7
Move the cursor to the Voice Set number, then select the desired
number by using the data dial, [INC/YES] and [DEC/NO] buttons.
■
The [E] indicator
When changing the value of the parameter in the Drum Kit mode, the [E] (Edit) Indicator
will appear on the top left corner of the LCD display. This gives a quick confirmation that
the current Drum Kit has been modified but not yet stored. To store the current edited status,
follow the instructions on the next page.
Settings
0 – 127 (0: No Assign)
Edit Indicator
