Song Mode [SONG]
Reference
100
DTX900 Owner’s Manual
03: Song Name, Tempo, Repeat
This Job lets you set the name, tempo and repeat on/off set-
tings for the current Song.
1
Name
Enters the characters of the current Song name (up to 10). You
can call up the Character List by pressing the [SF6] LIST but-
ton and enter the name. For detailed instructions on naming,
refer to “Basic Operation” on page 15.
B
Tempo
Determines the tempo called up when the current Song is
selected.
C
Repeat
Determines whether or not Song playback is repeated. Setting
this parameter to on plays the current Song repeatedly, while
setting this parameter to off plays through the current Song to
the end, then stops.
D
[SF6] LIST
When the cursor is located on the Name box, you can call up
the Character List by pressing the [SF6] LIST button and
enter the name. For detailed instructions on naming, refer to
“Basic Operation” on page 15.
01: Quantize
This job (applied to the current Song and the specified
track) adjusts the timing of note events by moving them
closer to the nearest exact beat.
1
Track
Determines the track (1 or 2) to which Quantize is applied.
B
Quantize (Resolution)
Determines the note timing to which the note data will be
aligned. You can select the desired value by pressing the [SF6]
button to call up the value list.
16
th
note triplet
16
th
note
8
th
note triplet
8
th
note
1/4 note triplet
1/4 note
Dotted 1/4 note
C
[SF6]
(note type icon)
When the cursor is located on the Quantize value, the note
type icon is shown at the tab menu corresponding to the [SF6]
button. In this condition, you can call up a list of the note type
icons by pressing the [SF6] button, then select the desired
item from the list.
02: Mix Track
This job mixes all data from both tracks 1 and 2 of the cur-
rent Song to either track 1 or 2 of the current Song.
1
Track
Determines the track (1 or 2) to which the mixed track is cop-
ied. The track which is not selected here will have no data
after executing the Mix Track Job.
NOTE
• Keep in mind that the pressing the [ENTER/STORE] button (execut-
ing the Job) is not necessary for the Song Name, Tempo, Repeat job.
Range
30 – 300
Settings
off, on
Track Jobs
[SF2] TRACK
• Keep in mind that executing this Job may irrevocably change the rhythm
feeling of your original performance (such as intentional early or late
hits), because once the data is changed by executing the Job, it cannot
be restored.
1
4
2
3
NOTICE
Settings
1, 2
Settings
When “3/8,” “6/8,” “9/8,” “12/8” or “15/8” is
selected:
16th note triplet, 16th note, 8th note triplet,
8th note, 1/4 note, dotted 1/4 note
When another value is selected:
16th note triplet, 16th note, 8th note triplet,
8th note, 1/4 note triplet, 1/4 note
Settings
1, 2
1
2
3
1
