Drum Kit Mode [DRUM KIT]
Reference
DTX900 Owner’s Manual
97
Dr
um Kit mode
Ref
erence
Song mode
Clic
k mode
Tr
igger mode
File mode
Utility mode
Chain mode
Sampling mode
From this display, you can assign an original name to the
Drum Kit.
1
Name
Enters the characters of the Drum Kit name (up to 12). You
can call up the Character List by pressing the [SF6] LIST but-
ton and enter the name. For detailed instructions on naming,
refer to “Basic Operation” on page 15.
B
Icon
Determines the Drum Kit icon shown on the [F1] PLAY dis-
play. When “off” is selected, no icon will be shown in the [F1]
PLAY display.
C
[SF6] LIST
When the cursor is located on the Name box, you can call up
the Character List by pressing the [SF6] LIST button and
enter the name. For detailed instructions on naming, refer to
“Basic Operation” on page 15.
From this display, you can copy the parameter settings
from the specified Trigger Input jack/Trigger Input Source/
MIDI note of the specified Drum Kit to the specified Trig-
ger Input jack/Trigger Input Source/MIDI note of the spec-
ified User Drum Kit.
After setting the parameters of copy source and destination,
press the [ENTER/STORE] button to perform the Copy
operation.
The available parameters differ depending on the value of
the Type parameter located at the left top corner.
When the Type is set to “Input” (Trigger Input jack):
When the Type is set to Source:
When the Type is set to MIDI:
1
Type
Determines which segment is used as copy source and copy
destination: the Trigger Input jack (Voice Set), Trigger Input
Source (Voice) or MIDI (MIDI note).
B
Source Drum Kit number
Determines the Drum Kit number used as the source. “Cur-
rent” means the currently edited Drum Kit.
C
Copy Source
Determines the source of the Copy operation. When the Type
is set to “Input,” this parameter determines the Trigger Input
jack used as the source. When the Type is set to “Source,” this
parameter determines the Trigger Input Source used as the
source. When the Type is set to “MIDI,” this parameter deter-
mines the MIDI note name used as the source.
D
Destination Drum Kit number
Determines the Drum Kit number used as the destination.
“Current” means the currently edited Drum Kit.
E
Copy Destination
Determines the destination of the Copy operation. When the
Type is set to “Input,” this parameter determines the Trigger
Input jack used as the destination. When the Type is set to
“Source,” this parameter determines the Trigger Input Source
used as the destination. When the Type is set to “MIDI,” this
parameter determines the MIDI note name used as the desti-
nation.
F
STACK/ALTERNATE COPY
When this checkmark is entered to this box, the Stack/Alter-
nate settings are also copied. When this checkmark is
removed from this box, the Stack/Alternate settings are not
copied, with the exception of the first note setting. Keep in
mind that this parameter is not available when the Type is set
to “MIDI.”
Naming the Drum Kit
[SF4] NAME
Settings
Acoustic, Rock, Electric, Percuss, Rhythm-
Box, Effect, R&B/H-Hop, PadSong, off
Copying the Parameter Settings
[SF5] COPY
1
3
2
4
3
1 2
5
6
Settings
Input (Trigger Input jack), Source (Trigger
Input Source), MIDI
Settings
Current, PRE: 01 – USR: 50
Settings
Current, USR: 01 – 50
6
4
3
1 2
5
4
3
1 2
5
