1 Connections
11
DTXPRESS
IV
Owner’s Manual
The DTXPRESS IV can be played from an acoustic drum kit if the kit is fitted with an optional set of drum triggers (such as Yamaha DT20
Drum Triggers) and the triggers are properly connected to the input jacks of the DTXPRESS IV.
DTXPRESS IV Special Set
Setting up with Acoustic Drums
Attaching the Module Stand
Attach the included module stand to
the DTXPRESS IV using the module
stand fastening screws.
* Be sure to use the included screws.
When assembling the Special Set, the legs
of the rack must be slid backwards to
maintain proper balance of the set. For
details, refer to the assembly instructions
of the rack system.
CAUTION
To
1
SNARE
To
8
KICK
To
2
TOM1
To
3
TOM2
To
4
TOM3
To HI HAT
CONTROL
To
6
CRASH
To
5
RIDE
DTXPRESS IV
Module stand
(included)
Module stand fastening screws
(2; included)
* First, connect the RHH130’s [PAD]
output jack to the
7
HI HAT jack on
the DTXPRESS IV, then connect the
RHH130’s [HI HAT CONTROL] out-
put jack to the HI HAT CONTROL
jack on the DTXPRESS IV.
To the external pad input
jack of KP65 (kick pad)
To
7
HI HAT
* Foot pedal is not included in the
Special Set.
