8
DTXPRESS
IV
Owner’s Manual
Controls and Functions
q
Drum Kit button (DRUM KIT)
• For entering the Drum Kit Select display. (p. 15)
• Hold the [SHIFT] button and press the [DRUM KIT] button to
enter the Trigger Setup Select page. (p. 14)
• This button can also be used to temporarily mute all sounds of
all voices.
w
Click button (CLICK)
• For entering the Click (Metronome) Setting page. (p. 18)
• Hold the [SHIFT] button and press the [CLICK] button to enter
the Groove Check Setting display. (p. 24)
e
Song button (SONG
>
>
>
>
/
■
)
• For entering the Song Select page. (p. 22)
• Hold the [SHIFT] button and press the [SONG
>
>
>
>
/
■
] button to
enable recording standby mode for the DTXPRESS IV.
• Press this button to start/stop song playback or recording.
r
Shift button (SHIFT)
Holding this button and pressing another specific button switches
to the function printed above each button on the top panel.
t
Select buttons (
<
<
<
<
,
>
>
>
>
)
• For selecting an item you want to edit (the selected item
flashes). If there are multiple pages either before or after the
page currently displayed, the buttons are used to view the next
or previous page. Hold the button to continuously move the
flashing cursor.
• Press these two buttons together to scroll continuously back
and forth through the pages. Holding the [
<
] button first and
pressing the [
>
] button moves to the previous page while
holding the [
>
] button first and pressing the [
<
] button moves
to the next.
• Hold the [SHIFT] button and press the [
<
]/[
>
] buttons to
select the trigger input you want to edit.
y
Click ON/OFF button (
ON/OFF)
• For starting/stopping the click sound (metronome). (p. 18)
• Hold the [SHIFT] button and press the [
ON/OFF] button to
enter the Tap Tempo Setting page. (p. 21)
u
Save/Enter button (SAVE/ENTER)
• For saving data or executing an operation (Enter).
• Hold the [SHIFT] button and press the [SAVE/ENTER] button
to enter the Utility page, which is used to make overall settings
for operating the DTXPRESS IV.
i
Click lamp
The red lamp lights on the first beat of every measure when the
click or a song is playing. The other beats are indicated with a
green light.
o
LED display
For indicating the tempo, the number selected in the current page,
or the click timer depending on the setting made. (p. 21)
!0
LCD display
For displaying important information and data used in operating
the DTXPRESS IV.
!1
Jog dial
Rotate the jog dial to change the value selected with the cursor
(the flashed item to be edited) in the display. Rotate the dial to the
right (clockwise) to increase the value, and to the left to decrease.
Hold the [SHIFT] button and rotate the knob to change the cur-
rent tempo.
~~~~~
YAMAHA
~~~~
~~~
DTXPRESS
IV
~~
8.8.8.
q
o
i
w
e
r
y
u
t
!0
!1
Top Panel
