Edit Section
58
[Chorus] System Chorus Effect
Configure the system chorus effect. This setting data will be
sent to the built-in tone generator when you recall and play
the drum kit you are currently editing. This setting data is
shared not only with each drum voice (MIDI channel 10),
but also with all other parts from the built-in tone generator.
n
You cannot configure the system chorus effect when the Localizer is
enabled (page 57).
1
Type
Select a chorus type. For system chorus, you can choose from
the following 14 types. Select NONE if you want to
temporarily disable the system chorus.
❏
Settings:
NONE, CHORUS1~4, CELESTE1~4,
FLANGER1~3, SYMPHNIC, ENSEMBLE, PHASER
For detailed explanation for any other parameters, refer to the
Effect Type List in the separate Data List. Note that the same
parameter name may not always suggest an identical function.
n
System chorus effect offers a single chorus effect specified here to all
parts from the built-in tone generator. Use an insertion effect if you
want to apply a different chorus effect to a drum voice.
[InsFX] Insertion Effects
Configure each of 2 insertion effects. Besides the system
effects, you can use these to apply a variety of effects to drum
voices, or to make an advanced internal mix by DTXTREME
IIs itself.
n
You cannot configure the system chorus effect when the Localizer is
enabled (page 57).
1
FX=
Select the target insertion effect (1 or 2) using the leftmost
knob.
❏
Settings:
1, 2
2
Type
Select an effect type to assign. You can assign any of 44 types
for each insertion effect.
❏
Settings:
THRU, HALL1~2, ROOM1~3, STAGE1~2, PLATE,
DelayLCR, DelayLR, ECHO, CrossDlay,
KARAOKE1~3, CHORUS1~4, CELESTE1~4,
FLANGER1~3, SYMPHONIC, ENSEMBLE,
ROTARY, TREMOLO, AUTOPAN, PHASER,
DISTORTION, OVERDRIVE, AMPSIM, 3BandEQ,
2BandEQ, FILTER, AUTOWAH, TOUCHWAH1~2,
ENHANCER, COMP, NOISEGATE
For detailed explanations of the other parameters, refer to the
Effect Type List in the separate Data List. Note that the same
parameter name may not always represent an identical
function.
[Loclizr] Localizer
Configure the 3D effects from the Localizer. These effects are
only effective when monitored through stereo headphones.
When monitored through speakers, instruments to which the
Localizer effect is applied may sound strange.
[Chorus] Type LFO Depth FBLeval
CHORUS1 0.25Hz 54 +13
1
[InsFX] Type Dry/Wet L>RDlay R>LDlay
FX=1 CrossDlay (D=W) 170.0 170.0
1
2
[Loclizr] Type DrSens AcpSens HRTF
NORNAL 16 16 15
1
4
3
2
[Loclizr]Rotation Dist Angle
120 10.0 30
5
6
7
