Utility Features
74
Use the leftmost knob to jump to the first page of each
category, then immediately open the desired page by scrolling
up or down with the Page buttons.
Also, refer to Basic Operations on page 20.
[UT 1] & [UT 2] EQ
The EQ pages let you set the master equalizers that will be
applied to the entire stereo output from the built-in tone
generator. These EQ settings offer a parametric equalizer for
the midrange, and a pair of shelving equalizers for the low and
high frequencies.
1
Low Freq
Determines the center frequency for the low frequency band.
❏
Settings:
32Hz~2.0kHz
2
Low Gain
Determines the gain or level for the low frequency band.
❏
Settings:
–12~+12 (dB)
3
Mid Freq
Determines the center frequency for the mid frequency band.
❏
Settings:
100Hz~10.0kHz
4
Mid Gain
Determines the gain or level for the mid frequency band.
❏
Settings:
–12~+12 (dB)
5
High Freq
Determines the center frequency for the high frequency band.
❏
Settings:
500Hz~16.0kHz
6
High Gain
Determines the gain or level for the high frequency band.
❏
Settings:
–12~+12 (dB)
n
These three-band equalizers affect only the audio signals of the
OUTPUT and PHONES jacks. They do not affect the audio of the
INDIVIDUAL OUTPUT jacks.
[UT 1] Low(Freq Gain) Mid(Freq Gain)
EQ 100Hz + 0 800Hz 0
[UT 1] Low(Freq Gain) Mid(Freq Gain)
EQ 100Hz +0 800Hz +0
1
2
3
4
[UT 2] High(Freq Gain)
EQ 2.0kHz +0
5
6
