Edit Section
45
[FootCtrl1] & [FootCtrl2]
HH Controller Function
These two pages let you specify the function of a hi-hat
controller (Yamaha HH series), connected to the HI-HAT
CONTROL jack on the rear panel.
n
You may not have hi-hat sounds or lose control of them if you
inadvertently change parameter values in these two pages, when
using normal hi-hat settings of the hi-hat pad to the trigger input 8
(HI-HAT).
1
Func
Set the hi-hat controller function.
❏
Settings:
• HiHatSP: Used as hi-hat controller. You can control tone
changes of your drum kit by applying pressure on the pedal
(default).
• HiHat: Used only as hi-hat controller.
• MIDI: Used only as MIDI continuous controller.
2
Sens
Adjust the sensitivity of the hi-hat controller. The larger the
value, the greater the sensitivity of the controller.
❏
Settings:
0~63
3
HHInput
Select the trigger input that connects the hi-hat pad. This
setting internally links the hi-hat controller and the hi-hat pad
when you select HiHatSP or HiHat
1
for the controller
function. If you select none here, trigger inputs 1 to 16 will
become identical in trigger settings (page 40) — this drum kit
will not have hi-hats. In addition, you can use a foot switch
for hi-hat control (page 46).
❏
Settings:
none, IN1~IN16 (default: IN8)
n
Normally, the trigger input 8 is used for hi-hats (as designated on
the rear panel). This parameter lets you specify any trigger input
(1 to 16) for hi-hats if you want to create a custom drum kit
completely from scratch.
4
MIDI
Set the MIDI channel to output MIDI data
5
from the
hi-hat controller. The default is channel 10 for the drum kit.
❏
Settings:
1ch~16ch (default: 10ch)
5
Type
Set the type of MIDI data output from the hi-hat controller.
❏
Settings:
• Ctl0~Ctl119: Controller number (default: 4)
• A/T: Aftertouch
• P/B up: Pitch Bend Up
• P/Bdwn: Pitch Bend Down
n
For more information on available controller numbers, refer to the
Controller Number List in the separate Data List.
[FootCtl1] Func Sens
HiHat 16
1
2
[FootCtl2] HHInput MIDI Type
IN8 10ch Ctl 4
3
5
4
