Edit Section
46
[FootSw1] & [FootSw2]
Foot Switch Function
These two pages let you specify the function of a foot switch
(Yamaha FC4 or FC5) that is connected to the FOOT SW
jack on the rear panel.
1
Func
Select the foot switch function.
❏
Settings:
• HiHat: Acts as a hi-hat controller (switching between open and
closed sounds). Make sure to set an appropriate velocity value
2
when selecting this.
• click: Enables or disables the click.
• inc: Increment — selects the next drum kit in the Play mode
display, or selects the next step in the Chain Play display.
• dec: Decrement — selects the previous drum kit in the Play
mode display, or selects the previous step in the Chain Play
display.
• bypass: Temporarily disables trigger inputs (page 76).
• SStop: Controls playback of the main song (same as Start/Stop
in the transport control).
• MIDI: Outputs Control Change data. Make sure to set the
related detailed parameters
3
~
6
when selecting this.
• HH
➝
BD: Generates a trigger signal for trigger input 9 (KICK)
when the foot switch is pressed. Make sure to set an appropriate
velocity value
2
when selecting this.
2
Velocity
Determines the velocity value output from the foot switch
when HiHat or HH
➝
BD is selected for the function
1
.
❏
Settings:
1~127
3
MIDI
Determines the MIDI channel for the Control Change data
4
output from the foot switch when MIDI is selected for the
function
1
.
❏
Settings:
1ch~16ch
4
Type
Determines the Controller number output from the foot
switch when MIDI is selected for the function
1
.
❏
Settings:
Ctl0~Ctl119 (controller number)
n
For more information on available controller numbers, refer to the
Controller Number List in the separate Data List.
5
OnValue
Determines the control value output when pressing the foot
switch, when MIDI is selected for the function
1
.
❏
Settings:
0~127
6
OffValue
Determines the control value output when releasing the foot
switch, when MIDI is selected for the function
1
.
❏
Settings:
0~127
[FootSw1] Func Velocity MIDI Type
HiHat 111 ---- ------
1
4
3
2
[FootSw2]OnValue OffValue
127 127
5
6
