background image

Utility Features

80

[UT 11] MIDI Receive

The MIDI Receive page lets you set how the built-in tone 
generator is controlled via MIDI.  MIDI control includes 
external MIDI events and song playback from the built-in 
sequencer.

h

When disabling MIDI control of the built-in tone generator, you 
can control (play) it only from the drum pads.

1

Receive10

Enable or disable reception of MIDI events incoming via 
channel 10 (channel messages).  Set this to off if you want to 
play the built-in tone generator only from the pads and the 
Audition button.

❏ 

Settings:

 off, on

n

Channel messages include Note On, Program Change, Control 
Change, Pitch Bend Change, and so on.

2

PC

Enable or disable reception of Program Change data. Set this 
to on if you want to select a voice program for each part using 
song settings or incoming Program Change data.  Set this to 
off to select a voice program for other parts using the settings 
that have been programmed to the drum kit.

❏ 

Settings:

 off, on

3

PC10

Enable or disable reception of Program Change data on 
channel 10.  Set this parameter and PC 

2

 both to on if you 

want to select a drum kit using song settings or incoming 
Program Change data.

❏ 

Settings:

 off, on

4

SysEx

Enable or disable reception of System Exclusive data.  Set this 
to off if you do not want the DTXTREME IIs to receive bulk 
data or parameter change messages. 

❏ 

Settings:

 off, on

[UT 12] MIDI Send

The MIDI Send page lets you set how the built-in controllers 
affect the instrument.  MIDI controllers include triggering 
using pads and song playback from the built-in sequencer.

1

Local

Enable or disable the built-in controllers.  Set this to off if you 
want to play the built-in tone generator only with external 
MIDI events from MIDI IN or USB.

❏ 

Settings:

• off:  MIDI events generated by pad play and song playback will 

only be sent out from MIDI OUT or USB, and not routed to 
the built-in tone generator.

• on:  The built-in tone generator will sound by pad play and song 

playback (normal operation).

n

Since the built-in tone generator operates as a separate sound 
module when you set local control to off, it will become completely 
silent if you disable (set to off ) all parameters found in the previous 
MIDI Receive page and shut out incoming MIDI events.

2

SendHH

Enable (on) or disable (off ) transmitting of MIDI data 
generated by the hi-hat controller, from MIDI OUT or USB.  
You can specify the type of MIDI data in trigger settings 
(page 45).

❏ 

Settings:

 off, on (default)

n

Continuous data from the hi-hat controller is always sent to the 
built-in tone generator, regardless of this setting.

[UT 11] Receive10  PC     PC10   SysEx  
 MIDI      on      on      on     on   

1

2

3

4

[UT 12]  Local   SendHH    
 MIDI      on      on   

1

2

Summary of Contents for DTXTREME IIs






































































































Reviews: