Utility Features
85
Memory Card Feature
You can store up to 40 drum kits (U1 to U40), up to 32 songs
(U1 to U32), and 32 chains in the DTXTREME IIs internal
memory. Moreover, an external memory card (SmartMedia)
allows for storing many more kits, songs, and chains — as
many as you want. The memory card is also useful for storing
waveform samples captured on the DTXTREME IIs and for
transfer of other audio files from a computer — so you can
use them for additional drum voices. Various memory card
functions are available from the CARD pages in the utility
features.
n
For more details and precautions on using memory cards with the
DTXTREME IIs, refer to the section “Handling the Memory Card”
in the Appendix.
[UT 28] Formatting a Memory Card
Your new memory card must be formatted before use. You
can format it in the last WAVE page.
n
DTXTREME IIs formats a memory card in MS-DOS (with the
FAT16 file system), generally used for PC disk media. As a result,
the formatted memory card can also be used with a computer, if you
use a compatible card reader/writer. You can also format the
memory card on the computer; however, for best results and to
avoid read/write errors, always use cards that have been formatted
on the DTXTREME IIs.
Format Operation
Hold the memory card so that its connector portion (gold) is
facing up, insert it into the Card slot, and then press the
ENTER/YES button. An “Are You Sure?” confirmation
message will appear in the display. Press the ENTER/YES
button to start formatting the card. Press the EXIT/NO
button to cancel the operation. The display will show “Now
executing, Please wait.” during formatting, and will show
“Done.” when the operation is complete, before returning to
the previous display.
If data is already saved on the memory card, be careful not to format
it. If you format the memory card, all the previously recorded data
will be deleted.
[UT 22] Load FileName
CARD allChain "DTXSET01"
[UT 23] Save FileName Volume
CARD all kit "INITWAVE"
[UT 24] Delete FileName Volume
CARD all data "DTXSONG1"
[UT 25] Rename FromFile Volume
CARD all kit "INIT-SYS"
[UT 26] MoveWave FromFile ToVolume
CARD "VOLUME01 /NEW-FILE" VOLUME02
[UT 27] Create VolumeName
CARD VOLUME "UNTITLED"
[UT 28] Format Smart Media
CARD
[UT 28] Format Smart Media
CARD
