26
Power
Connecting to Power Source
Make sure that the DTXTREME’s POWER switch is in the STANDBY position. Plug the
supplied AC power adapter to the DC IN socket on the DTXTREME rear panel.
Fix the power cable to the cable hook so as to ensure that the adapter plug does not come
loose.
n
Always use the supplied AC power adapter (PA-5C or PA-D12). Power adapters other than this may cause
malfunction or damage to the DTXTREME. Also, unplug the power adapter from the AC outlet if the
DTXTREME is not used for an extended period.
Power-On Sequence
When all necessary connections (trigger, audio, MIDI) are complete, turn down all volume
controls for the DTXTREME and other audio equipment. Turn on your system in the order:
MIDI master devices, MIDI slave devices, and audio equipment (first mixer, then amplifier or
powered speakers).
When turning off your system, first turn down all volume controls for the audio equipment,
then turn off devices in the reverse order to this.
AC power adapter
To AC outlet
SNARE
TOM1
TOM2
TOM3
1
2
3
4
OUTPUT
L MONO
R
1
DC IN 12V
STANDBY
ON
CONTRAST
+
Cable hook
Audio equipment (first mixer, then amplifier)
POWER ON!!
MIDI master devices
DTXTREME (MIDI slave device)
DRUM TRIGGER MODULE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
L
R
