REFERENCE SECTION
Features of the DTXTREME
10
Data Control Knobs
Up to five parameters are shown in the display, and each can be adjusted directly using the
knob located under the displayed parameter. For example, in the following display, the
tempo is adjusted by turning the knob located under the TEMPO parameter. Turn each knob
clockwise to increase the associated value, and counter-clockwise to decrease it. You can
largely increase or decrease the value by turning the associated knob while holding down
the SHIFT button.
EXIT/NO and ENTER/YES Buttons
Press the EXIT/NO button when you want to exit from any mode. This will take you back to
Drum Kit Play mode. If you want to apply a particular setting, press the ENTER/YES button.
Also, you can use these buttons when performing or canceling a Store operation.
Sequencer Buttons
The Start/Stop and Record buttons are used to control the song sequence. Use the CLICK
button to switch the metronome on or off. See page 13 for further details.
n
Refer to the Owner’s Manual Basic Section for details about using the other controls on the front panel,
such as the Mute button and Volume sliders.
DRUM TRIGGER MODULE
KIT=P1 SONG=P1 TEMPO BEAT CLICK
MAPLE Horizon =107 4/4
SHIFT
EXIT
NO
ENTER
YES
EXIT
NO
ENTER
YES
CLICK
TAP
GROOVE CHECK
Summary of Contents for DTXTREME
Page 1: ......