background image

REFERENCE SECTION

Drum Kit T

rigger Edit Mode

36

[TrgRim] Trigger Rim

Set the Rim Key On mode and Rim Velocity 
parameters for each input.

1

Input=

Select the trigger input.

Settings:

1 - 16

n

If the Learn parameter in the [UT 5] page in Utility 
mode has been set to “always,” you can select the 
trigger input by hitting the corresponding pad.  See 
page 93 for details of the Learn parameter.

2

RimKeyOn (Rim Key On Mode)

Set the Rim Key On mode, defining the way in 
which the sound is played when you hit the rim 
of a pad. Use “single” mode for rimshot or similar 
voices, “hold” mode for sustaining voice, and 
“withpad” mode when playing rimshot-type and 
pad voices simultaneously.

single: 

Normal playback of the voice set for 

rimshot.

hold: 

The voice set for rimshot is played back 

sustained when you hit the rim of a pad.  When 
you hit it again, the sustained playback is 
stopped.

withpad: 

The voice set for rimshot is played 

back simultaneously with the pad voice when 
you hit a pad.

Settings:

single, hold, withpad

3

RimVel (Rim Velocity)

Set the velocity when you hit the rim of a pad.  
As explained below, the velocity output can be 
fixed or variable according to the strength with 
which you hit the pad.

mute hi: 

When you hit the rim of a pad, the 

velocity that is output is dependent on the 
Velocity Curve in [TrgSens1] and the Level Range 
and Velocity Range in [TrgSens2]. Since the 
muting sensitivity is set to a higher level with this 
setting, you can mute a sustained sound with a 
small trigger input level generated at the rim.  
Appropriate for cymbal pads.

mute lo:

 Same as “mute hi” but the muting 

sensitivity is set to a lower level. So if you want 
to use just the muting feature, use the “mute hi” 
setting. If you want to hit the rim while without 
disabling muting, use the “mute lo” setting.

variable: 

The velocity that is output is dependent 

on how hard you hit the pad, and also on the 
Velocity Curve in [TrgSens1] and the Level Range 
and Velocity Range in [TrgSens2].  

fix1 - fix127: 

Regardless of how hard you hit the 

pad, the velocity is always output at this fixed 
level. However, you will be unable to use 
muting. Also, these settings allow more 
responsive triggering than “mute hi” or “mute lo”.

Settings:

Rim velocity: mute hi, mute lo, variable, fix1 - 
fix127

4

Hold Grp (Hold Group)

Set the Hold Group for multiple trigger inputs 
that are assigned “hold” in the RimKeyOn 
parameter.  The Hold Group setting allows only a 
single pad to play notes at any given time.  If you 
set the same group number to multiple trigger 
inputs, hitting a pad from that group will mute 
notes triggered by other pads in the same group.  
It is useful to prevent an unnecessary stack of 
notes.

Settings:

off, 1 - 32

[TrgRim] RimKeyOn RimVel HoldGrp        
Input=16 withpad  fix127   16           

1

4

3

2

Summary of Contents for DTXTREME









































































































































Reviews: