REFERENCE SECTION
Drum Kit T
rigger Edit Mode
37
[TrgCopy1] Trigger Copy 1
Copy the settings for one of the trigger inputs in
the current drum kit to those of a trigger input in
another drum kit specified. This is useful when
configuring a trigger input with similar settings.
1
(from) Input
Select the source input to be copied.
❏
Settings:
1- 16
2
(to) Kit
Select the destination drum kit to copy to. Select
“current” when copying to the current drum kit.
❏
Settings:
current, U1-U40
3
(to) Note
Select the destination input to be copied to.
❏
Settings:
1 - 16
Procedure
1.
Specity the source input to be copied and the
destination drum kit and input.
2.
Press the ENTER/YES button and you will see
an “Are you sure?” message.
3.
Press the ENTER/YES button again and the
setings will be copied. If you press the
EXIT/NO button instead, the settings will not
be copied and you will be returned to Drum
Kit Play mode.
[TrgCopy2] Trigger Copy 2
Copy the trigger-related settings from the current
drum kit to another drum kit specified. This is
useful when creating a drum kit with similar
settings.
1
(to) Kit
Select the destination drum kit number to copy
to.
❏
Settings:
U1-U40
Procedure
1.
Specify the destination drum kit to copy to.
2.
Press the ENTER/YES button and you will see
an “Are you sure?” message.
3.
Press the ENTER/YES button again and the
setings will be copied. If you press the
EXIT/NO button instead, the settings will not
be copied and you will be returned to Drum
Kit Play mode.
[MIDIEG] MIDI Envelope Generator
Set the EG curve and transition time and the
controller number output from MIDI OUT when
the “Func” parameter in the [TrgFunc] page has
been set to “MIDI EG.” This is useful when using
an external MIDI synthesizer as a drum tone
generator. Refer to the Effect Parameter List in the
Appendix for details.
[TrgCopy1]Input Kit Input
from 16 to current 16
1
3
2
[TrgCopy2]Copy Current Trigger to Kit
U1
1
[MIDIEG] Curve Time MIDI Type
3 -- 32 1ch Ctl 16
1
3
4
2
Summary of Contents for DTXTREME
Page 1: ......