34
En
Setup Menu
When the aspect ratio of your TV is 16:9
(widescreen):
*1:
If the disc is not assigned to playback in
panscan, it is played in letterbox.
*2:
The side of the picture may be stretched
depending on the TV. In this case, check the
screen size and aspect ratio of your TV.
Turning the progressive scan
function on/off
This feature is only available if you have
connected this unit to a progressive scan TV
through the component video jacks (see
“Component video jacks <A>” on page 10).
•
Select [PROGRESSIVE] in “VIDEO
SETUP PAGE”.
OFF
Select this to disable the progressive scan
function.
ON
Select this to enable the progressive scan
function.
Notes on activating progressive scan:
• Ensure that your TV is equipped with
progressive scan.
• Connect using a component video cable.
• When making HDMI connections, you
cannot select [PROGRESSIVE].
• (Europe and Russia models only) When
[COMPONENT] is set to [RGB] (see
page 36), you cannot select
[PROGRESSIVE].
• You can turn off the progressive scan
without using the setup mode if no picture is
displayed. See “No picture is displayed
when you do not use progressive scan
connections (using the component video
jacks)” in “Troubleshooting” on page 43.
Adjusting picture settings
This unit comes with three predefined sets of
picture color settings and one personal setting
that you can define yourself.
1
In “VIDEO SETUP PAGE”, press
5
/
a
to
highlight [PICTURE SETTING], and then
press
3
.
STANDARD
Select this for the standard picture setting.
BRIGHT
Select this to make the TV picture brighter.
SOFT
Select this to make the TV picture softer.
PERSONAL
Select this to personalize your picture color by
adjusting the brightness, contrast, tint and
color (saturation).
2
Press
5
/
a
to select a setting, and then
press
ENTER
.
3
If you select [PERSONAL] in step
1
,
proceed to steps
4
-
7
.
16:9
16:9
4:3
Setting
Playback
disc
TV display
*
2
