DVD-C996/DV-C6280
DVD-C996
DV-C6280
32
Function
Logic input pin to select between Bank <A> or <B> of the CV, RGB, or Y/C inputs. Internally pulled high.
Unfiltered analog composite video or luma video input. Internally pulled high. A composite or luma or green
signal must be present on either the CVINFA/Y2 or the CVINFB/Y3 input to provide necessary sync signals
to other channels (R, G, B, Y, C). Otherwise, sync must be provided at SYNCIN. For RGB applications the
green channel with sync can be used as an input to this pin.
Filtered analog composite video or luma video input for Bank <A>. Note that SYNC is stripped from this
signal for the other channels. A composite or luma or green signal must be present on either the CVINFA/Y2
or the CVINFB/Y3 input to provide necessary sync signals to other channels (R, G, B, Y, C). Otherwise, sync
must be provided at SYNCIN. For RGB applications the green channel with sync can be used as an input to
this pin.
Filtered analog composite video or luma video input for Bank <B>. Note that SYNC is stripped from this
signal for the other channels.
Analog ground
Analog 5V supply
Filtered analog RED video or luma video input for Bank <A>.
Filtered analog RED video or luma video input for Bank <B>.
Filtered analog GREEN video or luma video input for Bank <A>.
Filtered analog GREEN video or luma video input for Bank <B>.
Filtered analog BLUE video or chroma video input for Bank <A>.
Filtered analog BLUE video or chroma video input for Bank <B>.
Logic input pin to select whether the outputs of CVOUT1/YOUTA and CVOUT2/YOUTB are from filtered or
unfiltered CV sources. Internally pulled low.
Logic input pin to select whether the outputs of CVOUT1/YOUTA and CVOUT2/YOUTB are from filtered or
unfiltered CV sources. Internally pulled low.
Analog BLUE video output or chroma output from either BINA/C1 or BINB/C2
Analog GREEN video output or luma output from either GINA/Y6 or GINB/Y7
5V-power supply for output buffers of the RGB drivers
Analog RED video output or luma output from either RINA/Y4 or RINB/Y5
Ground for output buffers
Composite video output for channel 2 or luma output.
Composite video output for channel 1 or luma output.
5V-power supply for output buffers of the CV drivers
Input for an external H-sync logic signal for filtered channels. TTL or CMOS. For normal operation SYNCOUT
is connected to SYNCIN.
Logic output for H-sync detects for CVINFA/Y2 or CVINFB/Y3. TTL or CMOS. For normal operation SYNCOUT
is connected to SYNCIN.
Pin Name
A/B MUX
CVINU/Y1
CVINFA/Y2
CVINFB/Y3
GND
VCC
RINA/Y4
RINB/Y5
GINA/Y6
GINB/Y7
BINA/C1
BINB/C2
SWAP CVF
SWAP CVU
BOUT/COUT
GOUT/YOUTD
VCCORGB
ROUT/YOUTC
GNDO
CVOUT2/YOUTB
CVOUT1/YOUTA
VCCOCV
SYNCIN
SYNCOUT
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
IC5 : ML6427CS
Lowpass Video Filter
A/B MUX
CVINU/Y1
CVINFA/Y2
CVINFB/Y3
GND
VCC
RINA/Y4
RINB/Y5
GINA/Y6
GINB/Y7
BINA/C1
BINB/C2
1
2
3
4
5
6
7
8
9
10
11
12
SYNCOUT
SYNCIN
VCCOCV
CVOUT1/YOUTA
CVOUT2/YOUTB
GNDO
ROUT/YOUTC
VCCORGB
GOUT/YOUTD
BOUT/COUT
SWAP CVU
SWAP CVF
24
23
22
21
20
19
18
17
16
15
14
13
