DVD SETUP MENU OPTIONS
39
ON-SCREEN MENU
5
Eng
lish
■
Video setup menu
1
In DVD/CD mode, press
SET UP
.
2
Press
/
to select [VIDEO SETUP PAGE] icon.
3
Press
ENTER (OK)
to confirm.
TV type
This menu contains the options for selecting the color
system that matches the connected TV. For details, see
“Selecting the TV type” on page 24.
TV display
This menu contains the options for matching the aspect
ratio of the receiver to the connected TV. For details, see
“Setting the TV display” on page 25.
Progressive function
The progressive scan display present 60 complete frames
per seconds, rather than 30 frames per second of interlaced
scanning (ordinary normal TV system). With nearly
double the number of lines, progressive scan offers higher
picture resolution and eliminates bothersome motion
artifacts those jagged edge on moving objects.
Before enabling the progressive scan function, you must
ensure:
1
Turn on your TV progressive scan function (refer to
your TV owner’s manual).
2
You have connected the DVD receiver to your TV
using
Y P
B
P
R
(see “Connecting a TV” on page 19).
1
In [VIDEO SETUP PAGE], press
/
to
highlight [PROGRESSIVE], then press
.
OFF
Select this to disable progressive scan function.
ON
Select this to enable progressive scan function.
2
Press
/
to select a setting and press
ENTER
(OK)
to confirm.
→
Follow the instructions shown on the TV to
confirm the selection (if any).
–
If a blank/distorted TV screen appears, wait for 15
seconds for auto recovery to activate.
If you are changing the setting to
OFF
by using the remote
control, follow the procedure below.
1
Open the disc tray.
2
Press
,
then press
ANGLE.
Picture settings
This receiver comes with three predefined sets of picture
color settings and one personal setting that you can define
yourself.
1
In [VIDEO SETUP PAGE], press
/
to
highlight [PICTURE SETTING], then press .
STANDARD
Select this for the standard picture setting.
BRIGHT
Select this to make the TV picture brighter.
SOFT
Select this to make the TV picture softer.
PERSONAL
Select this to personalize your picture color by
adjusting the brightness, contrast, tint and color
(saturation).
2
Press
/
to select a setting and press
ENTER
(OK)
to confirm.
3
If you selected [PERSONAL], proceed to step
4
.
→
The [PERSONAL PICTURE SETUP] menu
appears.
Note
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
BLACK LEVEL
CLOSED CAPTION
VIDEO SETUP PAGE
Note
Note