Screen Functions
16
Switches a D-XSUB preset.
Set to the optimal frequency response characteristics according to the application and
genre of music.
•
OFF (NORMAL):
Turns D-XSUB off. This is a general-purpose frequency response
characteristic setting.
•
BOOST:
Boosts the frequency band accentuating a sense of punch in the audio.
•
XTEND LF (extended LF):
Extends playback frequencies to cover lower frequencies.
Adjusts the frequency response characteristics for all speakers. Adjust the 6 Band EQ
parameters to your liking as well the intended application.
q
ON/OFF
Turns the 6 Band EQ on/off. When off, only the outline of EQ characteristics will be
shown on the display.
w
FLAT
Sets the amount of gain on all bands to 0 dB.
e
Bands A – F
Select the desired band whose parameters you wish to check. Press the main knob on
the selected band to have the cursor move to the parameter display.
r
Parameter Display
Shows the parameters of each band. Move the cursor to a parameter name and press
the main knob to start setting parameter values. Press the [
] (Back) key to return
the cursor to the parameter name. Press the [
] (Back) key again to return to the
band selection screen.
Sets the delay time. This is used to compensate for the distance between speakers, etc.
Set this by time or distance.
q
ON/OFF
Turns the delay on/off.
w
TIME [ms]
Sets the delay time in milliseconds.
e
DISTANCE [m, ft]
Sets the delay time by physical distance (in meters or in feet).
D-XSUB Screen
Subwoofer
EQ Screen
q
w
e
r
The three delay time indications change in conjunction. The last edited unit will appear on the
HOME screen.
DELAY Screen
e
w
q
NOTE
