Yamaha EAD10, Owner'S Manual

S-1

EAD10 Owner’s Manual

For EAD10

This product utilizes batteries or an external power supply (adapter). 
DO NOT connect this product to any power supply or adapter other 
than one described in the manual, on the name plate, or specifically 
recommended by Yamaha.

WARNING: 

Do not place this product in a position where anyone 

could walk on, trip over, or roll anything over power or connecting 
cords of any kind. The use of an extension cord is not recommended! 
If you must use an extension cord, the minimum wire size for a 25’ 
cord (or less ) is 18 AWG. NOTE: The smaller the AWG number, the 
larger the current handling capacity. For longer extension cords, con-
sult a local electrician.

This product should be used only with the components supplied or; a 
cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is 
used, please observe all safety markings and instructions that accom-
pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE: 

The information contained in this manual is believed to be correct at 
the time of printing. However, Yamaha reserves the right to change or 
modify any of the specifications without notice or obligation to update 
existing units.

This product, either alone or in combination with an amplifier and 
headphones or speaker/s, may be capable of producing sound levels 
that could cause permanent hearing loss. DO NOT operate for long 
periods of time at a high volume level or at a level that is uncomfort-
able. If you experience any hearing loss or ringing in the ears, you 
should consult an audiologist. 
IMPORTANT: The louder the sound, the shorter the time period before 
damage occurs.

Some Yamaha products may have benches and / or accessory mount-
ing fixtures that are either supplied with the product or as optional 
accessories. Some of these items are designed to be dealer assem-
bled or installed. Please make sure that benches are stable and any 
optional fixtures (where applicable) are well secured BEFORE using.
Benches supplied by Yamaha are designed for seating only. No other 
uses are recommended.

NOTICE: 

Service charges incurred due to a lack of knowledge relating to how a 
function or effect works (when the unit is operating as designed) are 
not covered by the manufacturer’s warranty, and are therefore the 
owners responsibility. Please study this manual carefully and consult 
your dealer before requesting service.

ENVIRONMENTAL ISSUES: 

Yamaha strives to produce products that are both user safe and envi-
ronmentally friendly. We sincerely believe that our products and the 
production methods used to produce them, meet these goals. In keep-
ing with both the letter and the spirit of the law, we want you to be 
aware of the following:

Battery Notice: 

This product MAY contain a small non-rechargeable battery which (if 
applicable) is soldered in place. The average life span of this type of 
battery is approximately five years. When replacement becomes nec-
essary, contact a qualified service representative to perform the 
replacement.

This product may also use “household” type batteries. Some of these 
may be rechargeable. Make sure that the battery being charged is a 
rechargeable type and that the charger is intended for the battery 
being charged.

When installing batteries, never mix old batteries with new ones, and 
never mix different types of batteries. Batteries MUST be installed cor-
rectly. Mismatches or incorrect installation may result in overheating 
and battery case rupture.

Warning: 

Do not attempt to disassemble, or incinerate any battery. Keep all bat-
teries away from children. Dispose of used batteries promptly and as 
regulated by the laws in your area. Note: Check with any retailer of 
household type batteries in your area for battery disposal information.

Disposal Notice: 

Should this product become damaged beyond repair, or for some rea-
son its useful life is considered to be at an end, please observe all 
local, state, and federal regulations that relate to the disposal of prod-
ucts that contain lead, batteries, plastics, etc. If your dealer is unable 
to assist you, please contact Yamaha directly.

NAME PLATE LOCATION: 

The name plate is located on the bottom of the product. The model 
number, serial number, power requirements, etc., are located on this 
plate. You should record the model number, serial number, and the 
date of purchase in the spaces provided below and retain this manual 
as a permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

SPECIAL MESSAGE SECTION

92-BP  

(bottom)

COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Electronic Acoustic Drum Module

Model Name : EAD10

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that may cause undesired operation.
See user manual instructions if interference to radio reception is suspected.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

(FCC DoC)