– 5 –
– 6 –
3. PRE-OPERATION CHECKS
CHECK ENGINE OIL (DAILY)
Before checking or refilling engine oil, be
sure the engine is not running and is
located on a stable, level surface.
■
If the oil level is below the lower level line
on the oil level gauge, refill with the
proper oil (see table) to the upper level.
Engine oil quantity:
1.55 L (0.41 US qt)
■
When filling oil in the engine, keep the
engine level and fill the oil up to the upper
mark of the oil level gauge. Measure the
oil level with the oil level gauge plugged
in position.
■
After an oil change, run the engine, and
recheck the oil level. The oil level may
drop a little as the oil fills the oil filter.
Fill the oil up to the upper mark of the oil
level gauge.
■
Change oil if it is contaminated.
(See Section 8 Maintenance Schedule)
■
Use 4-stroke automotive detergent oil of
API service class SE or higher grade
(SG, SH or SJ is recommended).
■
If multi-grade oil is used, oil consumption
tends to increase when the ambient
temperature is high.
STD-type
Option
Oil level
gauge
Upper level
Lower level
Oil level
gauge
Oil level
gauge
Oil level
gauge
Upper
level
Upper
level
Lower
level
Lower
level
5W
10W
20W
#20
#30
#40
10W-30
10W-40
-20 -10
0
10
20
30
40
-4
14
32
50
68
86
104
Single
grade
Multi
grade
Ambient
temperature
7D3-28199-U0-E0.indd 5
2018/10/03 11:34:50
