ELS-01/01C Owner’s Manual
125
Music Data Recorder (MDR)
7
Press the [COPY] button in the display to call up the Copy To
Display.
(If necessary) Change the destination.
For details on changing the destination, see page 103.
Press the [EXECUTE] button to execute the copy.
The song name in the destination is the same as the one of the source song. If
you copy a song to a folder that contains a song whose name is the same as the
source song, the copied song name will be “source song name_XXX” (XXX
indicates song number). If you want to change the song name, see page 108.
If you copy an XG-compatible song to another folder or media that contains a
song with the same name as the source song, a message appears prompting
confirmation of overwriting the song. Selecting [OVERWRITE] overwrites the
XG-compatible song in the destination.
To copy a song from USB flash memory to another:
It is recommended that you use connect both media (source and destination) to the
USB TO DEVICE terminal. However, if there are not enough terminals available, you
can copy a song by following the procedure below.
Follow the step 1 – 3 on page 124.
Press the
button several times until the Media List is
displayed.
Select “MEMORY” as the destination.
3
4
5
Never attempt to eject the
media or turn the power
off during copying (or
moving a protected song).
Data may be lost.
NOTE
If you copy a protected song
to the same folder as the
source song, the copied
song will be the protected
edit song.
1
2
3
Removing the media
during operation may
result in loss of the data.
Never attempt to remove
the media unless the
“Eject the source media”
message appears.
