Graphic Equalizer (GEQ)
20
EMX7 Owner’s Manual
1.
Call up the GEQ ON screen.
Press the corresponding AUX1, AUX2 or STEREO [GEQ
ACCESS] button for the channel that you wish to apply the
graphic equalizer.
Turning the Graphic Equalizer
(GEQ) ON/OFF
NOTE
If another screen is shown, press the appropriate [GEQ
ACCESS] button until the GEQ ON screen is called up.
[GEQ ACCESS] button
GEQ ON screen
2.
Turn the [MENU/CONTROL] rotary encoder
until the cursor highlights the GEQ ON but-
ton.
3.
Press the [MENU/CONTROL] rotary encoder
to turn the graphic equalizer on or off.
GEQ ON button
(Highlighted)
When ON
When OFF
Resetting the Gain for All Frequen-
cies
1.
When the GEQ ON screen is displayed, turn the [MENU/
CONTROL] rotary encoder until the cursor highlights the
RESET GEQ button.
2.
Press the [MENU/CONTROL] rotary encoder to bring up
the following confirmation screen.
3.
Turn the [MENU/CONTROL] rotary encoder until the cur-
sor highlights the OK button. Press the [MENU/CON-
TROL] rotary encoder to confirm your selection. All gain
values will then be reset. (Select the CANCEL button to
cancel the reset procedure.)
RESET GEQ button
