Trouble Recovery
66
2.
Put the engine in the desired position,
then tighten the manual valve screw by
turning it clockwise.
EMU29760
Treatment of submerged motor
If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immediate-
ly.
If you cannot immediately take the outboard
motor to a Yamaha dealer, follow the proce-
dure below in order to minimize engine dam-
age.
EMU29970
Procedure
1.
Thoroughly wash away mud, salt, sea-
weed, and so on, with fresh water.
2.
Remove the spark plugs and face the
spark plug holes downward to allow any
water, mud, or contaminants to drain.
3.
Drain the fuel from the vapor separator,
fuel filter, and fuel line.
4.
Spray “Fogging Oil” or supply engine oil
through the intake manifold and spark
plug holes while rotating the flywheel
manually.
5.
Take the outboard motor to a Yamaha
dealer as soon as possible.
CAUTION:
ECM00400
Do not attempt to run the outboard motor
until it has been completely inspected.
1. Manual valve screw
63P10.book Page 66 Tuesday, May 13, 2003 10:23 AM
Summary of Contents for F150C
