E
CYLINDER HEAD AND PUSH ROD
POWR
EXPLODED DIAGRAM
4
3
2
2
6
6
1
5
10
8
11
11 Nm (1.1 m•kg, 8.0 ft•lb)
25 Nm (2.5 m•kg, 18 ft•lb)
1st 6 Nm (0.6 m•kg, 4.3 ft•lb)
2nd 12 Nm (1.2 m•kg, 8.7 ft•lb)
2
4
3
1
1st 15 Nm (1.5 m•kg, 10.8 ft•lb)
2nd 30 Nm (3.0 m•kg, 22 ft•lb)
M6 x 12 mm
M8 x 60 mm
M8 x 40 mm
M6 x 45 mm
9
7
5-12
REMOVAL AND INSTALLATION CHART
Step
8
9
10
11
Q’ty
1
2
1
2
Service points
Refer to “SERVICE POINTS” section.
NOTE:
9
Clean the cylinder head and cylinder
body mating surface thoroughly.
9
When installing the gasket, do not
touch it with oily or greasy hands and
do not apply any sealant.
Reverse the removal steps for installation.
Not reusable
Procedure/Part name
Cylinder head ass’y
Push rod
Gasket (cylinder head)
Dowel pins