POWER UNIT
INSP
ADJ
E
3-6
a
b
2
1
Engine oil replacement
1. Remove:
9
Oil level plug
9
Drain plug with washer
2
9
Gasket
1
2. Install:
9
Gasket
1
9
Drain plug with washer
2
3. Fill:
9
Engine oil
(into the crankcase)
Drain plug:
20 Nm (2.0 m•kg, 14.4 ft•lb)
Recommended engine oil:
API: SE, SF, SE-SF, SE-SF-CC
or SG-CD
SAE: 10W-30 or 10W-40
Total quantity:
500 cm
3
(16.9 US oz, 17.6 Imp oz)
4. Install:
9
Oil level plug
5. Check:
9
Engine oil level
Refer to “Engine oil level“.
2. Check:
9
Engine oil level
Between
a
and
b
®
Proper quantity.
Above
a
®
Check for over filling or
for water in the engine oil.
Below
b
®
Add engine oil up to level
a
and check for oil leakage.
NOTE:
9
Run the engine for several minutes, turn
it off, and check the engine oil level
again.
9
If the engine oils still not with in the prop-
er level, add/drain as needed.
