FGDP-50 User Guide
10
B. USB mobile battery (commercially available)
@
Notes regarding charging
•
This product can be used even while the battery is charging.
•
If battery power is insufficient or abnormal, the Standby/On indicator (red) will blink.
•
The estimated time to go from a low battery level to a full charge is 1–3 hours with the
product turned off (depending on the usage environment and battery usage).
•
To recharge the battery after a full charge, you will need to unplug the USB cable, and
then connect it again.
USB power adapter/USB mobile battery requirements
Output
voltage:
Output
current:
DC 5 V
1.5 A or greater *USB BC specification compatible products
CAUTION
Make sure to use a USB power adapter or USB mobile battery with the specifications indicated
above. Using the wrong adapters or batteries can result in damage to the product or
overheating. Follow the instructions that come with the connected USB power adapter or the
USB mobile battery.
NOTICE
•
Use a USB mobile battery that has a low-current mode function, etc., and that can supply
power to devices with a current consumption of 25 mA or less. If you cannot charge the
battery with a USB mobile battery, try a USB power adapter to see if you can charge the
battery from a power outlet.
•
If the product turns off suddenly and unexpectedly immediately after the power is turned
on, your USB power adapter or USB mobile battery might not meet the required
specifications or might be damaged. Try using another adapter or battery that meets the
required specifications. If the product appears to be malfunctioning, please consult with
NOTE
When connected to a computer USB port or a USB power adapter with output current less
than 1.5 A, the remaining battery power might decrease even while charging (with the
Standby/On indicator (red) lit).
@
