FGDP-50 User Guide
103
LCD screen settings
Item (Display)
Description
Setting Range
Default
Setting
Pop-upTime
Abbreviation for Pop-up Display Time.
Sets the duration of a temporary pop-up screen
that appears on the LCD screen, such as tempo.
When set to “Hold,” the pop
-up screen will
continue to be displayed until a button is
operated, such as pressing the [EXIT] button.
1.0, 1.5, 2.0, 2.5,
3.0, 3.5, 4.0, 4.5,
5.0, 5.5, 6.0 sec,
Hold
3.0 sec
LCDBrightness
Adjusts the brightness of the LCD screen. The
larger the value, the brighter the screen.
1
–
16
10
@
LED settings
Item (Display)
Description
Setting Range
Default
Setting
LEDBrightness
Adjusts the brightness of the LEDs. The larger the
value, the brighter the LEDs.
1
–
4
4
LEDPattern
Select a lighting pattern for the RGB Square Pad
LEDs.
1
–
8
1
LEDPatAutoBar
Abbreviation for LED Pattern Auto Bar.
When set to a value other than “Off,” the LED
lighting pattern of the RGB Square Pad will
change every time the measure advances by the
set value.
For example, if the value is set to “8”
when LEDPattern = 6, the lighting pattern will
switch from 6 to 7 to 8 to 1 to 2... every 8
measures according to the currently set tempo.
NOTE
This function follows the tempo even if the
, such as Click or Session Creator, is
stopped.
Off, 1
–
127
4
LEDVisualizer
Sets whether the LEDs on the RGB Square Pads
light up (On) or not (Off) in conjunction with Pad
operation or playback of the Click sound.
Off, On
On
LEDSleep
Abbreviation for LED Sleep Time.
To prevent unnecessary power consumption, the
RGB Square Pad LED lights will enter sleep mode
after a certain period of inactivity. Here you can
set the time until sleep mode is activated.
Disabled, 30 sec,
1, 2, 5, 10, 15, 30,
60, 120 min
5 min
@
