FGDP-50 User Guide
104
Reversing the Pad layout left to right
Item
(Display)
Description
Setting Range
Default
Setting
PadLayout
You can flip the
Set this value to “Left” when playing with your left
hand, and to “Right” when playing with your right
hand.
NOTE
In Session Creator Mode, the RGB Square Pads will
have a fixed Pad number regardless of this setting.
Left, Right
Right
@
Other settings
Item (Display) Description
Setting Range
Default
Setting
AuditionVel
Abbreviation for Audition Velocity.
In
, set the velocity of the
audition sound that is played when a Pad Voice is
changed.
Off, 1
–
127
100
LocalControl
Sets whether a Pad is connected (On) or
disconnected (Off) from the product’s internal
sound source. Normally, this value should be set to
connected (On), but if you want to play only the
sound source of the MIDI device to which the
product is connected, set it to Off.
Off, On
On
AutoPowerOff
Abbreviation for Auto Power Off Time.
To prevent unnecessary power consumption, the
power of this product automatically turns off after
a certain period of inactivity. Here you can set the
time until the power is turned off.
Disabled, 5, 10,
15, 30, 60, 120
min
30 min
@
FactoryReset
Use this to reset all settings of this product to the factory defaults.
NOTICE
A factory reset will erase all data and return this product to its factory settings. Be sure to
save important data to a USB flash drive before executing a factory reset. See
this page
for
