FGDP-50 User Guide
120
to “On.”
Set
“Off” or a high value.
is set to “Off.”
Set
to “On.”
@
Sounds/Operations
Problem
Cause
Solution
Sound continues
to play.
A Pad is set to “On” in
If you know which Pad it is, hit that Pad again.
Alternatively, the sound can be turned off by
pressing the [EXIT] button on the top screen
of Kit Mode.
The volume
balance is not
good between
each of the sound
parts.
The volume of some parts is
too loud (or too quiet).
Adjust the volume, as described in the
following sections.
No effect is
applied even if the
effect depth
(Send Level) is
set to a high
value.
The effect is set too low for
either the entire Kit or for
each Pad.
Increase the Send Level for the Kit and the
Pad Voice. See
Send Level for the Kit, and
details about the Send Level for the Pad
Voice.
Noise occurs.
An audio loop has occurred
due to a USB connection
with a computer or smart
device.
A smart device is located
near the product.
Set the smart device to airplane mode.
The Pad settings
for the current Kit
have been
inadvertently
changed.
is set to “On.”
Set InterlockEdit to “Off.”
@
Sequencers
