FGDP-50 User Guide
75
is set to “06 Hall.”
II
With the effect preset kit “P32 BeatBoxPine” selected,
is set to “19 DynFlanger.”
III
With the effect preset kit “P05 R&B” selected,
is set to “10 TempoDelay2 D.”
IV
With the preset kit “P01 Maple” selected,
and
set for an appropriate effect. The first item is used to
simulate changes to drum tunings and cymbal diameter. The
second item is used mainly to simulate drum muting and
half-open hi-hats.
P02
PadIdea
I
With the pre
set kit “P01 Maple” selected, Note Repeat, Link,
and Velocity Limits are set for an appropriate effect.
By setting Pads S1 and A4 in the same Link Group
(
) and setting separate Velocity
Limit ranges for each (
), the Snare Open Rim (the Voice
assigned to A4) will be generated only if either Pad is hit hard.
In addition, by setting the A1
–
A3 RGB Square Pads to the
same Link Group and setting different Note Repeat Rates for
each (
), you can create
interesting sounds for the snare drum.
II
With the preset kit “P05 R&B” selected, Note Repeat, Hold
Mode, and Choke are set for an appropriate effect.
The Note Repeat Rate (
) for Hi-
hat Close can be varied by hitting the A1
–
A8 RGB Square
Pads.
In addition, various beats can be created by combining the K,
S1, S2, R1, R2, M1, and M2 Pads.
III
With preset kit “P47 SE&VocalEast” selected, the
functions
when the Pads are hit (
) are set for
an appropriate effect.
The A1 RGB Square Pad can be used to turn off all Voices
currently sounding (AllSoundOff), and A2 can be used to
choke the sound of the Kit (KitChoke).
IV
With preset kit “P25 EDM Yellow” selected, the functions
when the Pads are pressed further (
are set for an appropriate effect. Various expressions can be
