3
Adjustment
3-9
3.1.3 Motor cover
■
Removing the motor cover
1
Turn off the controller power.
2
Place a sign indicating the robot is
being adjusted.
Place a sign indicating the robot is being
adjusted, to keep others from operating the
controller or operation panel.
3
Enter the safety enclosure.
4
Cut the insulock-tie.
Cut the Insulock-tie binding the motor cable
with a pair of nippers, and remove.
Cutting the insulock-tie
Step 4
53306-A9-00
5
Pull out the motor cover.
Remove the hex socket-head bolts (M4) (2)
and pull out the motor cover.
Pulling out the motor cover
Step 5
53307-A9-00
■
Installing the motor cover
1
Turn off the controller power.
2
Place a sign indicating the robot is
being adjusted.
Place a sign indicating the robot is being
adjusted, to keep others from operating the
controller or operation panel.
3
Enter the safety enclosure.
4
Secure the motor cover.
Insert the motor cover into the mounting
holes and secure it with the hex socket-head
bolts (M6) (2).
5
Secure the cable with the insulock-
tie.
Use the
φ
5 hole in the motor cover to secure
the motor cable with the insulock-tie.
FLIP-X_maint_E_V1.50.indb 9
18/05/15 15:01
Summary of Contents for FLIP-X Series
