DOWNLOAD
POWER
STATUS
LAN 1
LAN 2
microSD
USB
LAN2
4
3
2
1
ON
STANDB
Y
CONSOLE
LAN1
DOWNLOAD
POWER
STATUS
LAN 1
LAN 2
microSD
USB
LAN2
4
3
2
1
ON
STANDBY
CONSOL
E
LAN1
Types of configuration
methods available
Using the Web browser of PC (pages 17
and 36)
If a PC is connected to the product, you can use the
Web browser to open “Basic configuration page”
included in the product to view the product status
or configure various function settings.
Using console commands (page 143)
You can use TELNET or SSH software to enter
commands from the console screen to check the
product status or configure various functions.
You can also enter commands from a PC connected
to the console port of the product using a serial
cable. Using console commands enables you to
configure more detailed settings than using other
methods.
Using an external memory device (page 147)
You can load a configuration file stored in a
commercially-available external memory device
(USB memory stick or microSD card) to the product
to change settings.
The following shows the methods to configure the product functions or check the configuration.
Use the easiest method according to your environment.
Chapter 7
Operating and managing the product
Operating and managing the product
Changing the product settings
Use Web browser, TELNET, or SSH
software (via LAN)
Use the console port
Use remote setup from a
remote site (3G line)
Use a USB memory
stick or microSD card
142
FWX120 Operation Manual
7
