PREPARATION
To assemble the snowmobile correctly, supplies (i.e., oils, greases, shop rags, etc.) and working space are required.
Workshop
The workshop where the snowmobile is assembled, should be clean and large. The floor should be level.
Self-protection
Protect your eyes with suitable safety glasses or goggles when using compressed air, when grinding or when doing any
operation which may cause particles to fly off.
Protect hands and feet by wearing safety gloves and shoes.
SYMBOLS USED ON TRANSPORT PACKAGE COVER
a
: IMPORTANT
This unit delivered to carrier in a good condition. For
protection against loss due to damage, inspect thor-
oughly.
If damage is noted, make note on freight bill.
Shipper assumes no further liability to the transporta-
tion company.
Your claim should be filed against carrier for damage
of any nature.
b
: WARNING
• Only stack this unit with same crate size
• Assure units are stacked securely (All four corners
fit securely onto bottom unit)
• Maximum handling (transport & movement) stack -
3 units
DO NO
T STEP ON
a
b
Contents of the transport package are fragile,
therefore it must be handled with care.
Indicates correct upright position of the trans-
port package.
Transport package must be kept away from
rain.
Up to 9 of the transport packages can be piled
up.
Only stack this unit with transport packages of
the same size.
Made of high-density polyethylene.
Do not step anywhere on this transport pack-
age.
