3-17
PARKING BRAKE ADJUSTMENT
1. Remove:
• Shroud
• Right side cover
Refer to “SHROUD AND COVERS”
2. Measure:
• Parking brake cable distance
a
Out of specification
→
Adjust.
3. Adjust:
• Parking brake cable
Adjustment steps:
• Loosen the locknut
1
.
• Turn the adjuster
2
in or out until the specified
distance
a
is obtained.
• Tighten the locknut.
4. Measure:
• Brake pad clearance (
b
+
c
)
Out of specification
→
Adjust.
5. Adjust:
• Brake pad clearance
Adjustment steps:
• Loosen the locknut
1
.
• Turn the adjuster
2
in or out to until the speci-
fied clearance between the brake pads
3
and
brake disc
4
is obtained.
• Tighten the locknut.
Parking brake cable distance:
43.5 ~ 46.5 mm (1.713 ~ 1.831 in)
Turning in
→
Distance
a
is increased.
Turning out
→
Distance
a
is decreased.
Brake pad clearance (
b
+
c
):
1.5 ~ 2.0 mm (0.059 ~ 0.079 in)
