PRE-OPERATION CHECKS
4-2
IF WAITING AT TRAFFIC SIGNAL IS FOR LONG, SWITCH OFF THE ENGINE
TO PROTECT THE ENVIRONMENT AND TO LOWER FUEL CONSUMPTION
If any item in the Pre-Operation Check is not working properly, have it inspected and repaired before operating
the Motorcycle.
WARNING
Fuel Tank
Brake and clutch lever pivots
Battery
Lights, signals and switches
Chassis fasteners
Center and sidestand pivot
• Make sure that all nuts, bolts, and screws are properly tightened.
• Tighten if necessary.
• Check fuel level.
• Fill with fuel if necessary.
• Fill with distilled water if necessary.
• Check fluid level.
• Check for proper operation.
6-25 ~ 6-26
3-3, 6-28 ~ 6-29
3-5 ~ 3-6
• Lubricate if necessary.
• Check for smooth operation.
• Lubricate if necessary.
• Check for smooth operation.
ITEM
CHECKS
6-23
PAGE
6-23
-
Brake and shift pedal shafts
Control and meter cable
• Lubricate if necessary.
• Check for smooth operation.
• Lubricate if necessary.
• Check for smooth operation.
6-22
6-23
