4-6
4
Clock mode
Pushing the “CLOCK” button switches the display
between the clock mode “CLOCK” and the hour
meter mode “HOUR” in the following order:
CLOCK
→
HOUR
→
CLOCK
To set the clock
1. Set the display to the clock mode.
2. Push the “SELECT” button and “RESET” but-
ton together for at least three seconds.
3. When the hour digits start flashing, push the
“RESET” button to set the hours.
4. Push the “SELECT” button, and the minute
digits will start flashing.
5. Push the “RESET” button to set the minutes.
6. Push the “SELECT” button and then release it
to start the clock.
Fuel meter
The fuel meter indicates the amount of fuel in the
fuel tank. The display segments of the fuel meter
disappear from “F” (full) towards “E” (empty) as the
fuel level decreases. When the “E” segment disap-
pears and the fuel level warning indicator flashes,
refuel as soon as possible.
TIP
This fuel meter is equipped with a self-diagnosis
system. If the electrical circuit is not working cor-
rectly, all the display segments and fuel level warn-
ing indicator will start flashing. If this occurs, have
a Yamaha dealer check the electrical circuit.
1. Fuel level warning indicator
2. Fuel meter
3. “E” segment
U2LB10E0.book Page 6 Thursday, March 7, 2013 4:13 PM
Summary of Contents for GRIZZLY 550 2013
Page 62: ...7 1 7 EBU21132 RIDING YOUR ATV U2LB10E0 book Page 1 Thursday March 7 2013 4 13 PM...
Page 172: ...U2LB10E0 book Page 3 Thursday March 7 2013 4 13 PM...
Page 175: ......
Page 176: ......
