6-3
1
2
3
4
5
6
7
8
9
10
11
crank the engine more than 10 seconds on each
attempt.
7. If the engine is started with the choke in posi-
tion (1), the choke should be returned to posi-
tion (2) to warm up the engine. If the engine is
started with the choke in position (2), keep the
choke in this position to warm up the engine.
CAUTION:
ECB00160
For maximum engine life, always warm the en-
gine up before starting off. Never accelerate
hard when the engine is cold!
8. Continue warming up the engine until it idles
smoothly, then return the choke to position (3)
before riding.
NOTE:
The engine is warm when it responds normally to
the throttle with the choke turned off.
EBU20301
Starting a warm engine
Follow the same procedure as for starting a cold
engine, with the exception that the choke is not re-
quired when the engine is warm. Instead, start the
engine with the throttle slightly open.
EBU20550
Shifting
This ATV has a 3-speed forward transmission with
a centrifugal, automatic clutch. The transmission
allows you to control the amount of power you
have available at a given speed or for starting ac-
celerating, climbing, etc.
To shift into neutral, return the throttle lever to the
closed position and repeatedly depress the shift
pedal until it stops.
EBU20600
To start out and accelerate
1. Release the throttle lever.
1. Shift pedal
2. Neutral position
2
1
N
2
3
1
Summary of Contents for Grizzly 80 YFM80GX
Page 2: ...EBU17091 ...
Page 47: ...7 1 1 2 3 4 5 6 7 8 9 10 11 EBU21131 RIDING YOUR ATV ...
Page 128: ...11 9 1 2 3 4 5 6 7 8 9 10 11 EBU26132 ...
Page 131: ......
