background image

E

-8

MAINS

TV MODE

PAL
AUTO
NTSC

SUBWOOFER

OUT

VIDEO SIGNAL

OUT

IN

VCR

VIDEO

R

L

OUT

IN

AUX/MD

SPEAKERS

SEE OWNER'S MANUAL
FOR CONNECTION.

REAR

CENTER

REAR

R

L

CENTER : 6    MIN./SPEAKER
REAR :   12    MIN./SPEAKER

FRONT

R

L

6    MIN./SPEAKER

SPEAKERS

MONITOR

OUT

R

L

L

R

Preparations and connections

Connections

Never plug the AC supply lead of this system into the AC outlet until all connections are
completed.

On the main unit

Red: positive (+)
Black: negative (–)

Caution

Do not let the bare speaker wires touch each other as this could damage the amplifier and/or speakers.

When connecting a subwoofer (not included in this system)

You may wish to add a subwoofer to reinforce the bass frequencies.
When connecting a subwoofer to this system, connect the 

SUBWOOFER OUT

 terminal of this system to the INPUT

terminal of the subwoofer.
* Ordinary subwoofers, including the Yamaha Active Servo Processing Subwoofer System, are designed so that both the

amplifier and subwoofer are contained in the same unit.

* The 

SUBWOOFER OUT

 terminal outputs low frequencies from the left front, center and right front channels.

(The cut-off frequency of this terminal is 200 Hz.)

 Connecting speakers

Connect the speakers to the corresponding speaker terminals on the rear of the main unit by using the speaker cords. Make
sure that the polarity of the speaker cords is correct, that is the + and – markings are observed.  If these cords are reversed,
the sound will be unnatural and lack bass.

Subwoofer system
(not included in this system)

Rear speaker

Center speaker

Rear speaker

INPUT

Front speakers

To AC outlet

On the speakers

Red: positive (+)
Black: negative (–)

1

2

3

1

2

3

1

Press the tab.

2

Insert the bare wire.
[Remove approx. 5mm (1/
4”) insulation from the
speaker wires.]

3

Release the tab and secure
the wire.

1

Pull up the tab.

2

Insert the bare wire.
[Remove approx. 5mm (1/
4”) insulation from the
speaker wires.]

3

Press down the tab and
secure the wire.

Summary of Contents for GX-707RDS






















































Reviews: