E
-7
English
Preparations and connections
■
Mounting the rear speakers
Mount the rear speakers on a shelf, rack or on the floor, or hang
them on the wall.
To mount the rear speakers by using commercially
available speaker stands
The provided mounting bracket has 1 pair of screw holes (at an
interval of 60 mm). They are for mounting the speaker on a speaker
stand.
* These screw holes can be used with M4 screws only.
Note
It is recommended that you connect the speaker cords to the
speaker’s terminals before attaching the bracket to the speaker.
1
Attach the bracket to the bottom of the speaker by using the
provided screw so that the convex part of the bracket fits in the
grooved part of the speaker as shown left.
2
Mount the speaker on the speaker stand by using the screw holes
on the bracket.
To mount the rear speakers directly on the wall
If desired, you can hang the speaker on the protruding screws on
the wall without using the bracket.
Fasten screws into a firm wall or wall support as shown left, and
hang the holes of the speaker on the protruding screws.
* Make sure that the screws are securely caught by a narrow part
of the holes.
WARNING
• Each of the rear speakers weighs 0.8 kg (1 lbs. 12 oz.). Do not
mount them on thin plywood or soft wall surface material, as the
screws may come out of the flimsy surface, causing the speakers
to fall and be damaged, or result in personal injury.
• Do not fasten the speakers to the wall with nails, adhesives, or
other unstable hardware. Long-term use and vibrations may
cause them to fall.
• To avoid accidents resulting from tripping over loose speaker
cords, fix them to the wall.
• Select a proper position on the wall to mount the speaker and the
stand so that no one will injure his/her head or face with the edge
of the stand.
60 mm
Tapping screw (Available
at the hardware store)
Min.
12 mm
65 mm
W
all or w
all suppor
t
Mounting bracket
Screw
