background image

E

-13

English

CD/Video CD player operation

Basic play

1

Turn on the power.
* When you play a Video CD, you must also turn on the TV

monitor connected to this system.

2

Press 

INPUT

 

 or 

 (or 

INPUT

 on the remote control) until

“VCD/CD” (

2

) appears on the display.

3

Press 

 

OPEN/CLOSE

 to open the disc tray.

* The carousel will turn when you open the disc tray by

pressing 

 

OPEN/CLOSE

; therefore, make sure the

carousel stopped moving completely before you perform
further operations. Otherwise, you may cause damage to
your discs, or you might injure yourself.

4

Place discs on the table with label side facing upward.
* Up to three discs can be loaded on the table.

To load the third disc, rotate the disc table by pressing 

DISC

CHANGE

 on the front panel.

* 8 cm (3”) discs can be played without an adaptor.
* The disc placed on the right side is played first.

5

Press 

 

OPEN/CLOSE

 to close the disc tray.

* If the selected disc is a CD, the total number of tracks (

1

) and

the total playing time of the disc (

2

) will be displayed for

several seconds.

* If the disc contains more than 15 tracks, the “OVER 15”

indicator (

0

) will light up.

* If the disc tray is closed by pushing the front edge of the tray,

play will begin automatically.

* If the selected disc is a Video CD, “VCD” (

4

) lights up on

the display.

6

Press 

/  to begin play.

Note  

for Video CDs

If a Video CD (version 2.0) is selected, “PBC” (

5

) lights up on the

display, yet the total number of tracks (

1

), the total playing time

of the disc (

2

) and the music calendar (

9

) will not be displayed.

In this mode, disc play is controlled by the rule of Playback
Control. To play the disc in the Playback Control mode, skip to
page 20 and follow the procedure.
To cancel this mode and restore the normal play mode, press  .
“PBC” (

5

) disappears from the display.

To call the Playback Control mode again, press 

SELECT

 on the

remote control.

To pause

Press 

/ .

* The “

” indicator (

7

) will flash for all modes except for the

PBC mode.

To resume play,  press 

/  again.

To stop play

Press  .

DISC

3

   OPEN/ CLOSE

DISC CHANGE

DISC

2

DISC

1

DIGITAL VIDEO

VIDEO CD

Version 2.0 / Playback Control

3–DISC VCD CHANGER

STANDBY

/ON

STANDBY

TIMER

PROGRAM

B.BOOST

MUSIC

INPUT

PRESET/TUNING/BAND

A/B/C/D/E

/

VOLUME

UP

DOWN

PHONES

BASS

TREBLE

MODE

DOLBY NR

REC/

PAUSE

AUTO/

MANUAL

MEMORY

RANDOM

REPEAT

TIME

DISPLAY

STANDBY
indicator

POWER

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

9

0

      PRESET

TUNER

+I0

PRESET      

TIME

A

PROG

B

R.TIME

C

EDIT

D

DISC SKIP

INTRO

MODE

RETURN

SELECT

E

KARAOKE

TIME INDEX

DIGEST

TIME INDEX

VCD/CD

/

DIRECTION

LEVEL

REC/ PAUSE

TEST

PROGRAM

CENTER/ 

REAR/ DELAY

KEY/ECHO

MUSIC

SLEEP

INPUT

TAPE

VOLUME

DISC (1, 2, 3)

4

3, 5

/  (play/pause)

 (stop)

2

1

SELECT

 (stop)

1

/

(play/pause)

2

4

Continued 

Summary of Contents for GX-707VCD






















































Reviews: