E-10
■
Mounting the rear speakers
Mount the rear speakers on a shelf, rack or on the floor
directly, or hang them on the wall.
To mount the rear speakers on a wall
1
Attach the provided mounting bracket to the rear of the
speaker by using the provided screws.
2
Fasten screws into a firm wall or wall support as shown in
the diagram, and hang the holes of the mounting bracket
on the protruding screws.
* The holes are arranged so that the speakers can be
mounted in a side long, upright or upside-down way.
* Make sure that the screws are caught by a narrow part
of the holes securely.
Notes
●
Never attach the bracket to the speaker conversely.
●
Speaker cords should be connected to the speaker’s
terminals after the bracket has attached to the speaker to
prevent the speaker cords pressed between the speaker
and the bracket.
SETTING UP THE SPEAKERS
WARNING:
●
Each speaker weighs 0.8 kg (1 lbs. 12 oz.). Do not
mount them on thin plywood or soft wall surface
material, as the screws may come out of the flimsy
surface, causing the speakers to fall down and be
damaged, or result in personal injury.
●
Do not fasten the speakers to wall with nails,
adhesives, or other unsound hardware. Long-term use
and vibrations may cause them to fall down.
●
To avoid accidents resulting from tripping over loose
speaker cables, fix them to the wall.
To hang in a side long way
Hang the speakers so that each of them faces inside as
figured left.
40mm
1
2
Good
No good
Tapping screw
(Available at the
hardware store)
Wall/
wall support
