IMX644 Manager Owner’s Manual
26
Here you can edit the parameters of the 6-band equalizers provided for OUTPUT channels 1 through 4.
1
CHANNEL
Use this to select the OUTPUT channel whose EQ you want to edit.
2
[A&B]/[A]/[B] buttons
If OUTPUT channel 1 or 2 is selected, you can choose whether to edit channels A and B together or individually.
A dialog box will appear when you switch between [A]/[B] and [A&B], asking you to confirm that you want to copy parame-
ters between channels A/B. Channel A will be copied to B when you switch from [A] to [A&B], and channel B will be copied
to A when you switch from [B] to [A&B].
3
[EQ ON]/[EQ OFF] buttons
These turn the EQ on/off.
4
[COPY to] button
This copies the parameters of the currently-edited EQ to the EQ of another OUTPUT channel.
The “EQ COPY” dialog box will appear when you click this button. Use the option buttons to select a copy-destination OUT-
PUT channel, and click the [OK] button.
5
[Speaker Preset] button
This lets you recall preset parameters for various models of speakers.
The preset parameters contain EQ settings optimized for the response of
various speakers.
A list of speaker presets will appear when you click this button; select the
name of the appropriate speaker. The selected preset parameters will be
recalled and applied to the EQ settings.
Select “- - FLAT- - ”
if you want to return the EQ to the default (flat) settings.
6
DELAY
This sets the delay time of each OUTPUT channel.
These parameters are the same as in the BLOCK screen’s “DELAY” dialog
box; refer to
page 21
for details.
OUTPUT EQ screen
4
5
2
1
3
6
8
7
9
