background image

6

PLAYBACK (Common to DECKs A and B)

NATURAL SOUND  STEREO DOUBLE CASSETTE DECK  K-902

DOLBY NR

OFF/       B/       C

REC LEVEL

0

10

1

9

2

8

3

7

5

4

6

PHONES

DIRECTION

POWER

MODE

p

 / 

 / RELAY

!

PLAY

STOP

MUTE/SEARCH

EJECT

NORMAL

HIGH

DUBBING  A 

#

 B

!

PLAY

STOP

MUTE/SEARCH

REC/PAUSE

EJECT

RESET

RESET

DIRECTION

PLAYBACK

DECK A

RECORD/PLAYBACK

DECK B

POWER 

 ON

2

3

PHONES

STOP

1

RESET

!

4 5

Preparation for playback

÷

Turn on the POWER switch.

÷

Set your amplifier or receiver to cassette deck function mode.

Basic operation - To play back a cassette tape

EJECT

MODE

/

[

/

/

RELAY

1

3

5

4

Refer to the following
description.

DIRECTION

Select the tape running direction for DECK A
or B.  Each time this button is pressed, the
tape running direction changes between
forward (

#

) and reverse (

@

), and the

corresponding indicator lights on the display.

To stop playback
Press the STOP button.  To remove the cassette tape, press
the EJECT button.  The cassette compartment door opens.
To turn off the power, press the POWER button.

To set the counter reading to “0000”
Press the RESET button. Use the tape counter to aid in
locating a point on a tape (0000 to 9999).

To fast forward or rewind the tape
When the tape running indicator 

#

 is lit:

Pressing the 

 button fast forwards the tape while

pressing the 

!

 button rewinds the tape.

When the tape running indicator 

@

 is lit:

Pressing the 

!

 button fast forwards the tape while

pressing the 

 button rewinds the tape.

PLAY

2

DOLBY NR

OFF/

 B/

 C

Refer to the following
description.

Insert the cassette with the exposed tape side
facing down.  (The side facing you is called the
forward side and the opposite side is called the
reverse side.)  To close the compartment, push
in the compartment door until it locks shut.

Summary of Contents for K-902



















Reviews: