Yamaha KS-SW100, Owner'S Manual

KS-SW100 Owner’s Manual

3

The above warning is located on the rear of the unit.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol 
within an equilateral triangle is intended to 
alert the user to the presence of uninsulated 
“dangerous voltage” within the product’s 
enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to 
persons.

The exclamation point within an equilateral 
triangle is intended to alert the user to the 
presence of important operating and main-
tenance (servicing) instructions in the liter-
ature accompanying the product.

1

Read these instructions.

2

Keep these instructions.

3

Heed all warnings.

4

Follow all instructions.

5

Do not use this apparatus near water.

6

Clean only with dry cloth.

7

Do not block any ventilation openings. Install in accor-
dance with the manufacturer’s instructions.

8

Do not install near any heat sources such as radiators, 
heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.

9

Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug 
has two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. If 
the provided plug does not fit into your outlet, consult 
an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or 

pinched particularly at plugs, convenience receptacles, 
and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the 

manufacturer.

12 Use only with the cart, stand, tri-

pod, bracket, or table specified by 
the manufacturer, or sold with the 
apparatus. When a cart is used, 
use caution when moving the 
cart/apparatus combination to 
avoid injury from tip-over.

13 Unplug this apparatus during 

lightning storms or when unused for long periods of 
time.

14 Refer all servicing to qualified service personnel. Ser-

vicing is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug is 
damaged, liquid has been spilled or objects have fallen 
into the apparatus, the apparatus has been exposed to 
rain or moisture, does not operate normally, or has 
been dropped.

(UL60065_03)

CAUTION: TO REDUCE THE RISK OF 

ELECTRIC SHOCK, DO NOT REMOVE 

COVER (OR BACK). NO USER-SERVICEABLE 

PARTS INSIDE. REFER SERVICING TO 

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions 
contained in this manual, meets FCC requirements. 
Modifications not expressly approved by Yamaha may void 
your authority, granted by the FCC, to use the product.

2. IMPORTANT:

 When connecting this product to accessories 

and/or another product use only high quality shielded cables. 
Cable/s supplied with this product MUST be used. Follow all 
installation instructions. Failure to follow instructions could void 
your FCC authorization to use this product in the USA.

3. NOTE:

 This product has been tested and found to comply with 

the requirements listed in FCC Regulations, Part 15 for Class 
“B” digital devices. Compliance with these requirements 
provides a reasonable level of assurance that your use of this 
product in a residential environment will not result in harmful 
interference with other electronic devices. This equipment 
generates/uses radio frequencies and, if not installed and used 
according to the instructions found in the users manual, may 
cause interference harmful to the operation of other electronic 
devices. Compliance with FCC regulations does not guarantee 

that interference will not occur in all installations. If this product 
is found to be the source of interference, which can be 
determined by turning the unit “OFF” and “ON”, please try to 
eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected 
by the interference. 

Utilize power outlets that are on different branch (circuit breaker 
or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the 
antenna. If the antenna lead-in is 300 ohm ribbon lead, change 
the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory 
results, please contact the local retailer authorized to distribute 
this type of product. If you can not locate the appropriate 
retailer, please contact Yamaha Corporation of America, 
Electronic Service Division, 6600 Orangethorpe Ave, Buena 
Park, CA90620

The above statements apply ONLY to those products 
distributed by Yamaha Corporation of America or its 
subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

(class B)

FCC INFORMATION (U.S.A.)