Utility Settings
Owner’s Manual
36
In the Utility display, you can make various settings such as the Arpeggio tempo, MIDI transmit/receive
settings, and display related settings.
Basic Operation
1.
Press the [UTILITY] button.
The LED lamp above the button lights and the
Utility display appears.
2.
Use the SELECT buttons to select the
parameter to be edited.
For details on the parameters, refer to “Utility
Parameters” listed below.
3.
Use the DATA [INC] and [DEC] buttons to
change the value.
4.
After making the desired settings, press the
[ENTER] button to return to the Utility Top
display.
The settings you made here will be stored
automatically without the special operation. The
settings will be maintained until executing the
Factory Set operation.
Utility Parameters
Utility Settings
NOTE
For the Bulk Transmit and Factory Set
parameters, you can execute these
operations by simply pressing the DATA
[INC] button.
Display
Range
Initial
Value
Description
Tempo
10–300
120
Determines the tempo (BPM) of Arpeggio playback. The Arpeggio
will play according to the speed of the MIDI clock transmitted
from an external device or computer when the Sync parameter is
set to “Auto” (only when MIDI clock is transmitted continuously) or
“External.”
Sync
Auto, Internal, External
Auto
Determines the tempo source transmitting the MIDI clock to which
Arpeggio playback is synchronized.
Auto......... When MIDI clock is transmitted continuously from an
external MIDI device or computer, the internal clock of
the KX is not effective and Arpeggio playback is
synchronized with the external clock. When MIDI clock
is not transmitted from the external MIDI device or
computer, the internal clock of the KX is effective
meaning that the Tempo value set on the KX is
available.
Internal .... The Arpeggio will play with the Tempo value set on the
KX.
External ... The Arpeggio will play according to the speed of the
MIDI clock transmitted from an external device or
computer. When the KX does not receive MIDI clock,
the Arpeggio does not play.
Clock
Off, On
On
Determines whether the tempo clock of Arpeggio playback is
output as a MIDI message.
On ........... When this is selected, MIDI clock will be transmitted
while an Arpeggio plays back with the tempo specified
on the Tempo parameter above.
Off ........... When this is selected, MIDI clock will not be
transmitted.
VeloCurve
Soft2, Soft1, Normal,
Hard1, Hard2, Fix
Normal
Determines the Velocity Curve. For information about each value,
see page 27.
VeloFix
1–127
100
Determines the velocity value when the VelCurve is set to “Fix.”
Summary of Contents for KX25
Page 1: ...EN Owner s Manual ...
Page 54: ...Owner s Manual 54 MEMO ...
