Yamaha Commercial Audio M7CL StageMix User Guide
Page 12
4.4.1 Mix Sends ON
In SENDS ON FADERS mode, the [ON] button in each channel strip is
used to turn On/Off the Mix Send from each channel to the currently
selected target Mix/Matrix bus.
When a Mix or Matrix block is selected in the Navigation/Meter Bridge, the
SENDS ON FADERS button is not available.
To exit SENDS ON FADERS mode, press the [SENDS ON FADERS] button in
the left column.
4.5 EQ
Editing
To edit the EQ parameters for a channel, press a channel’s EQ curve in the
Mixer Overview window.
This will open a new EQ Editing window.
