manualshive.com logo in svg

Yamaha M7CL StageMix V1.5, Owner'S Manual

The Yamaha M7CL StageMix V1.5 Supplementary Manual is a must-have resource for users of the M7CL digital mixing console. Available for free download from 88.208.23.73:8080, this manual provides comprehensive instructions and valuable insights on operating and optimizing the M7CL, ensuring exceptional sound performance for any live event.

Share
Download
background image

 

Using program changes to recall scenes and library items

 

M7CL  Owner’s Manual

MIDI

 

17

 

201

 

4

 

Press the MIDI SETUP tab to access the 
MIDI SETUP page, and select the port and 
MIDI channel on which program changes 
will be transmitted and received, as 
described in “Basic MIDI settings” (

 

→

 

 

p. 198).

 

5

 

Press the PROGRAM CHANGE tab to 
access the PROGRAM CHANGE page.

 

In the PROGRAM CHANGE page you can specify 
how program changes will be transmitted and 
received, and choose the event (scene recall or effect 
library recall) that will be assigned to each program 
number.

This page includes the following items.

 

1

 

PROGRAM CHANGE field

 

Here you can switch program change transmission/
reception on/off, and specify whether program 
changes will be echoed out. This setting is linked with 
the PROGRAM CHANGE field of the MIDI SETUP 
page.

 

B

 

PROGRAM CHANGE MODE field

 

Here you can select the program change transmit/
receive mode. This setting is linked with the PRO-
GRAM CHANGE MODE field of the MIDI SETUP 
page.

C

List

This list shows the event (scene recall / effect library 
recall) assigned to each program number. The list 
shows the following items.

• CH/BANK

........Indicates the MIDI channel 1–16 on 

which program changes are trans-
mitted/received. In Single mode if 
the BANK button is on, this will be 
labeled BANK, and the numerical 
value in this column will correspond 
to the bank number.

• NO.

..................Indicates the program number 1–

128.

• PROGRAM CHANGE EVENT

...........Indicates the type/number/title of the 

event assigned to the program num-
ber for each MIDI channel (bank 
number). You can press an individ-
ual event to access the MIDI PRO-
GRAM CHANGE popup window, 
where you can change the assign-
ment for each program number.

D

CLEAR ALL button

Pressing this button will delete all event assignments 
in the list.

E

INITIALIZE ALL button

Pressing this button will restore all event assignments 
in the list to their default state.

F

Scroll knob

This knob scrolls the contents of the list. You can use 
multifunction encoder to control this.

6

Use the buttons of the PROGRAM CHANGE 
MODE field to select the program change 
transmission/reception mode.

You can select one of the following two program 
change transmission/reception modes.

●

Multi mode (when the MULTI button is on)

Program changes of all MIDI channels will be trans-
mitted and received. (The transmit/receive channel 
specified in the MIDI SETUP page will be ignored.)

When a program change is received, the event 
assigned to the corresponding MIDI channel and pro-
gram number in the list will be executed.

When you execute the specified event on the M7CL, 
the program change of the corresponding MIDI chan-
nel and program number in the list will be transmit-
ted.

●

Single mode (when the SINGLE button is on)

Only program changes of the transmit (Tx) and 
receive (Rx) channels specified in the MIDI SETUP 
page will be transmitted and received.

When a program change on the Rx channel is 
received, the event assigned to that program number 
of the corresponding channel in the list will be exe-
cuted.

When you execute the specified event on the M7CL, 
the program change of the corresponding program 
number will be transmitted on the Tx channel shown 
in the list. (If an event is assigned to more than one 
program number on the same channel, the lowest-
numbered program number will be transmitted.)

If you turn on the OMNI button / BANK button in 
Single mode, operation will change as follows.

• When the OMNI button is on

........... Program changes of all MIDI chan-

nels will be received. However, 
regardless of the MIDI channel that 
is received, the event assigned to 
the corresponding program number 
of the Rx channel will be executed.
Turning on the OMNI button will not 
change the operation for program 
change transmission.

• When the BANK button is on

........... The CH indication in the list will 

change to BANK (bank number), 
and bank select (control change #0, 
#32) + program change messages 
can be transmitted and received. 
This is convenient when you want to 
control more than 128 events on a 
single MIDI channel.

1

3

2

4

5

6

Summary of Contents for M7CL StageMix V1.5

























































































































































































































































































































Reviews:

No comments

Related manuals for M7CL StageMix V1.5

Yamaha TF-Rack Quick Manual preview
TF-Rack
Brand: Yamaha Pages: 28
Oster FPSTHB2800 Instruction Manual preview
FPSTHB2800
Brand: Oster Pages: 24
eta LAVADO Instructions For Use Manual preview
LAVADO
Brand: eta Pages: 46
American Audio Q-SD Record User Manual And Reference Manual preview
Q-SD Record
Brand: American Audio Pages: 37
Phonic POWERPOD 410 User Manual preview
POWERPOD 410
Brand: Phonic Pages: 22
Grunkel AM-25 G Manual preview
AM-25 G
Brand: Grunkel Pages: 14
Kambrook KHM300 Series Instruction Booklet preview
KHM300 Series
Brand: Kambrook Pages: 24
Rubi RUBIMIX-7 Translation Of The Original preview
RUBIMIX-7
Brand: Rubi Pages: 52
Feelworld L2 PLUS User Manual preview
L2 PLUS
Brand: Feelworld Pages: 35
Fairlight Prodigy Edit User Manual preview
Prodigy
Brand: Fairlight Pages: 148
Myria MY4098 Instruction Manual preview
MY4098
Brand: Myria Pages: 15
Russell Hobbs 24672 Manual preview
24672
Brand: Russell Hobbs Pages: 8
A/S WODSCHOW & CO AR30 Operating Instructions Manual preview
AR30
Brand: A/S WODSCHOW & CO Pages: 24
WERKU WK403240 Original Instructions Manual preview
WK403240
Brand: WERKU Pages: 48
Meicheng CMX-12 Operation Manual preview
CMX-12
Brand: Meicheng Pages: 28
XTline XT160H User Manual preview
XT160H
Brand: XTline Pages: 24
Cranborne Audio Camden EC1 Manual preview
Camden EC1
Brand: Cranborne Audio Pages: 12
Rane TTM 54 Operator'S Manual preview
TTM 54
Brand: Rane Pages: 6

Brands by name

Popular brands

Load more brands